Autel MaxiScope MP408 4 Channel Automotive Oscilloscope Basic Kit Works with Maxisys Tool
Top 4 reasons to get MaxiScope MP408:
1.MaxiScope MP408 is a PC and Android based 4-channel automotive oscilloscope,works in combination with your PC or MaxiSys Tablet(MS905, MS908, MS908P), which turns into a powerful diagnostic tool, providing you an insight to the inner workings of a vehicle’s electronic circuits.
2.measure and test virtually all the electrical and electronic components and circuits in any modern vehicles
3.Direct power supply through USB connection with PC or Android Device
4.Free Update Lifetime and one year warranty
2.Unzip the downloaded file,and click setup.exe to install thesoftware,and then click Next to continue.
3.Click the Browsebutton, and select a destination folder to install the program, and click Next to continue. Or directly click Next to continue without changing the default installation folder.
4.Click Install and the Setup.exe program will be installed onto the computer
How to install MaxiScope app for Android:
1. Copy the MaxiScope app (for example:ScopeV1.15.apk) to the external SD card;
2. Open the Es File Explorer and find the app (for example: ScopeV1.15.apk), click it to install.
Note: the MaxiScope app can only be installed on some of Autel tools.
5. Click on Update to start updating.
If you cannot communicate the Scope Module to the computer, you need to do the following check-ups:
1.Check if the USB connection is properly connected between the Scope Module and the PC.
2.Check if the LED breath light on the Scope Module is illuminated. If theLED light is shimmering, this indicates that a communication error has occurred. In this case, unplug the Scope Module and re-connect it to the computer.
3.Check if there is any firewall software interfering with the connection port.
Autel MaxiScope MP408 Features:
Portable design with strong housing and protective rubber boot
Maxicope MP408 Software Display:
1.Connection Status Icon
2.Menu Bar
3.Tool Bar
4.Channel Status Bar
5.Amplitude Coordinate
6.Waveform Display Section
7.Time Coordinate
8.Channel Setting Pane
9.Trigger Setting Pane
Maxiscope MP408 Protocols Display:
| Column name | Minmun Specification | Recomemded Specification |
| OS System | Windows XP, Vista , Win7 and Win8 32Bit | |
| Processor | 300MHZ | 1GHz |
| Memory | 256MB | 512MB |
| Free Disk Space | 1GB | 2GB |
| Ports | USB 1.1 | USB 2.0/3.0 |
1.The operating systems should be Professional and higher versions. The MaxiScope software is not supported by Home version of operating systems.
2.The MaxiScope software does not use all the disk space specified in the table. The free space is required to make Windows run efficiently.