I write this to share my problem about Autel MaxiSYS Pro MS908P key erasure on 2000 ford focus and its solution with you.
Vehicle Model and Year:
2000 Ford Focus Z-Tech
Diagnostic Tool Used:
Issue Description:
I intended to replace the PCM in my vehicle. With followed all the instruction for key erasure, the MaxiSYS MS908P seemed to freeze at the 9 second make on the task bar.
Reasons:
The engine told me that I could only program new third key with having 2 already programmed keys, which meant that I couldn’t program new key if I did not have 2 working keys.
Solution:
1 Download the beta version V6.12.10 to have a test.
2 Try to program key manually. The process bar will appear for 10s after key erasure. Please ignition off and program it as followed:
Turn the ignition key to position 0
Cycle key1 in the ignition from OFF to RUN for at least 3 seconds
Cycle key2 in the ignition from OFF to RUN for at least 3 seconds.
Cycle key1 in the ignition from OFF to RUN for at least 3 seconds.
Two keys are programmed now.
More details, please check below
www.AutelEShop.com
Skype: AutelEShop.com
Whatsapp:0086-13429866263
E-mail: sales@AutelEShop.com