Autel MD802 System Setup functions allow you to adjust default settings and view information about the scan tool.
1) Language: Selects the desired language.
2) Unit of measure: Sets the unit of measure to English or Metric.
3) Beep Set: Turns on/off beep.
4) LCD Test: Checks if the LCD display is working properly.
5) Key Test: Checks if the keyboard is working properly.
6) About: Provides information of the scan tool.
Settings of the unit will remain until change to the existing settings is made.
How to enter the Setup menu
From the Main Screen, use LEFT/RIGHT scroll button to select Setup, and press the OK button. Following the instructions to do adjustments and settings could make your diagnosis more conveniently and easily.
How to do Language Setup?
English is the default language.
1) From System Setup screen, use the UP/DOWN scroll button and LEFT/RIGHT scroll button to select Language, and press the OK button.
2) Use the UP/DOWN scroll button to select the desired language and press the OK button to save your selection and return to previous screen.
Unit of Measure
Metric is the default measurement unit.
1) From System Setup screen, use the LEFT/RIGHT scroll button to select EN/METRIC unit and press the OK button.
2) From Unit of Measure screen, use the LEFT/RIGHT scroll button to select the desired unit of measurement.
3) Press the OK button to save your selection and return to previous
menu. Or, press the ESC button to exit without saving.
Beep Set
The default setting is Beep On.
1) From System Setup screen, use the UP/DOWN scroll button and LEFT/RIGHT scroll button to select Beep and press the OK button.
2) From Beep Set menu, use the LEFT/RIGHT scroll button to select ON or OFF to turn on/off the beep.
3) Press the OK button to save your selection and return to previous menu. Or, press the ESC button to exit without saving.
Key Test
The Key Test function checks if the keyboard is working properly.
1) From System Setup screen, use the UP/DOWN scroll button
and LEFT/RIGHT scroll button to select Key Test, and press
the OK button.
2) Press any key to start test. When you press a key, the edge around
corresponding key on the screen should turn to red. Otherwise,
the key is not functioning properly.
3) Double press ESC to return to previous menu.
LCD Test
The LCD Test function checks if the LCD display is working normally.
1) From System Setup screen, use the UP/DOWN scroll button and LEFT/RIGHT scroll button to select LCD Test, and press the OK button.
2) Look for missing spots in the red, green, blue, black and white LCD display.
3) When completed, press the ESC button to exit.
About
The About function allows viewing of some important information
such as serial number and software version number of the scanner.
1) From System Setup screen, use the UP/DOWN scroll button and LEFT/RIGHT scroll button to select About and press the OK button; wait for the About screen to appear.
2) View tool information on screen. (Figure 3.6) Press the ESC button to exit without saving.