Autel Series Software Update Instructions
(Suitable for MaxiDiag Elite, MaxiCheck ,TS501, TS601, AL609, AL619,
EBS301,OLS301, VAG505, MOT PRO)
Here is the download link
http://www.auteleshop.com/upload/pro/autel-series-software-update-instructions.pdf
Firstly Register the Tool
Please go to our website www.autel.com to register an Autel ID.
Then sign in our website with your Autel ID and password to register
your tool: http://pro.auteltech.com/
Such as
Such as
Note: when registering the tool on our website, please make sure
that the serial number and register password that you input are correct.
On the tool itself, you can press on Setup->About to double check the
serial number and register password. If you only have the S/N, please
contact our technical support to check out the register password.
1. Log in our website with your Autel ID and password, and then
download the latest PC Suite for your tool from your account.
http://pro.auteltech.com
2. Then please install the PC Suite on a Windows computer that can get
Internet access.
3. Insert the SD card to USB port of the computer via a SD card reader,
run the PC Suit, then input your Autel ID and password to log in our
system. If you forget your password unintentionally, you may always
click the [Forget Password?] to link to our website and reset your
You can use the pull-down menu on the right corner to select
the correct SD card if two or more SD cards have been connected to
the PC. And you can click on the Install button to download the
software updates
.
.
To ensure the good performance of the scan tool, it is recommended to download
6. After downloading all the software, please insert the SD card back to
the tool; then you can enjoy the new software.